|
| |
TM 10-4930-241-13
2-21. PREPARATION FOR MOVEMENT -CONT.
p.
Fuel System - 600 GPM Pump External Fuel Can, Adapter and Fuel Hose Removal. Refer to figure 2-57.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal surfaces in
subzero temperatures. Always wear arctic mittens when handling components.
NOTE
Procedures covers removal of fuel can, adapter, and fuel hose from primary and
secondary 600 GPM pumps.
(1)
Disconnect end of fuel hose (8) from coupling (9) on adapter (4).
(2)
Disconnect other end of fuel hose (8) from external fuel connector (6) on 600 GPM pump (7).
(3)
Install cap (5) on external fuel connector (6) on 600 GPM pump (7).
(4)
Push handle (3) down to release tension on adapter (4).
(5)
Remove adapter (4) from fuel can (2) and install cap on fuel can (2).
Figure 2-57. Fuel System - 600 GPM Pump External Fuel Can, Adapter and Fuel Hose Removal.
2-115
|
