|
| |
TM 10-4930-241-13
2-21. PREPARATION FOR MOVEMENT - CONT.
n.
Fuel System - Primary 600 GPM Pump Output to Filler Hose of Fuel Tanks Removal. Refer to figure 2-55.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal surfaces in
subzero temperatures. Always wear arctic mittens when handling components.
CAUTION
To prevent contamination of fuel system components use care when
disconnecting coupling to avoid getting ice, snow, dirt, sand and debris on
coupling mating surfaces or in hoses.
NOTE
Refer to para 2-16e for disconnect of quick disconnect couplings.
(1)
Disconnect valve section (20) from adapter (19).
(2)
Disconnect adapter (19) from fueling manifold (16).
(3)
Disconnect fueling manifold (16) from filler hose (17) on fuel tank (18).
(4)
Disconnect fueling manifold (16) from one of collapsible hose (15).
(5)
Disconnect collapsible hose (15) from end of collapsible hoses (14).
(6)
Disconnect end of hoses (14) from fueling manifold (11) and disconnect the two collapsible hoses (14).
(7)
Disconnect fueling manifold (11) from filler hose (12) on fuel tank (13).
(8)
Disconnect fueling manifold (11) from end of hoses (10).
(9)
Disconnect collapsible hose (10) from end of hoses (9).
(10)
Disconnect end of hose (9) from fueling manifold (6) and disconnect collapsible hoses (9).
(11)
Disconnect fueling manifold (6) from filler hose (7) on fuel tank (8).
(12)
Disconnect fueling manifold (6) from end of collapsible hoses (5).
(13)
Disconnect end of hoses (5) from valve section (4) and disconnect four collapsible hoses (5).
(14)
Disconnect valve section (4) from fueling manifold (3).
(15)
Disconnect fueling manifold (3) from end of collapsible hose (1).
(16)
Disconnect collapsible hose (1) from output of primary pump (2).
2-111
|
