|
| |
TM 10-4930-241-13
2-21. PREPARATION FOR MOVEMENT - CONT.
l.
Fuel System - Secondary 600 GPM Pump Output to 200 (PM Filter-Separator Removal). Refer to figure 2-53.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal surfaces in
subzero temperatures. Always wear arctic mittens when handling components.
CAUTION
To prevent contamination of fuel system components use care when
disconnecting coupling to avoid getting ice, snow, dirt, sand and debris on
coupling mating surfaces or in hoses.
NOTES
There are three 200 GPM filter-separators used in AFSSP.
Refer to para 2-16e for disconnect of quick disconnect couplings.
(1)
Disconnect one end of female reducers (11, 12 and 13) from 200 GPM filter-separators (14, 15 and 16).
(2)
Disconnect other end of female reducers (11, 12, and 13) from end of collapsible hoses (8, 9 and 10).
(3)
Disconnect collapsible hose (10) from fueling manifold (5).
(4)
Disconnect collapsible hoses (8 and 9) from elbows (6 and 7).
(5)
Disconnect elbows (6 and 7) from fueling manifold (5).
(6)
Disconnect one end of collapsible hoses (4) from fueling manifold (5) with three valves.
(7)
Disconnect other end of collapsible hose (4) from fueling manifold (3) with two valves.
(8)
Disconnect two collapsible hoses (4).
(9)
Disconnect one end of hoses (1) from fueling manifold (3) with two valves.
(10)
Disconnect other end of collapsible hoses (1) from secondary 600 GPM pump (2).
(11)
Disconnect two 25 foot collapsible hoses (1).
2-107
|
