| |
TM 10-4930-241-13
1-10. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS - cont. I
j.
200 GPM Filter Separator Assembly (10). The filter separators are skid mounted units containing a separator
tank and various valves, gages and piping. The filter separators are installed downline of the 600 GPM pump to
remove water and particle contaminants from the fuel. For location and description of major components on the
filter separator, refer to TM 10-4330-23613
k.
Arctic Nozzle (11). Arctic nozzles are supplied with AFSSP for refueling. The hand operated arctic nozzle is
supplied with 1f-inch quick disconnect couplings.
l.
Tank Coupler (12). Tank couplers are supplied with AFSSP for refueling at drum .filling points. The hand
operated coupler is supplied with 3-inch quick disconnect couplings.
m.
Ball Valve (13). Ball valves are supplied with AFSSP for refueling at bottom loading points. The hand operated
ball valve is supplied with 4-inch quick disconnect couplings.
n.
Single Point Refueling Nozzle (Type D1) (14). D1 nozzles are supplied with the AFSSP accessory kit for
refueling equipment with pressurized fuel systems. The D1 nozzles are non-regulating, so fuel pressure must be
controlled by the fuel manifold. For location and description of major components of the D1 nozzle, refer to TM
10-4930-242-13&P
o.
Closed Circuit Refueling (CCR) Nozzle with Gravity Fill Adapter (15). The CCR nozzles and gravity fill adapters
supplied with the AFSSP accessory kit and are used to connect the fuel system to the equipment. The hand
operated CCR Nozzle locks onto the equipment refueling adapter and regulates fuel pressure to the equipment.
Nozzles are supplied with a ground clamp and bonding plug for electrical connection of the nozzle to the
equipment. Refueling equipment with gravity feed fuel tanks requires connection of the gravity fill adapter to the
CCR Nozzle. For location and description of major components of the CCR nozzle and gravity fill adapter, refer
to TM 10-4930-243-13&P
p.
Ground Rods (16). The fourteen ground rods provide grounding for fueling points, filter separators and 600 GPM
pumps.
1-5
|