|
| |
TM 10-4930-240-13
2-20. PREPARATION FOR MOVEMENT - cont.
c. Refueling Point Ground Rod Removal. Refer to figure 2-23.
WARNING
Use care to prevent injury when removing ground rods. Wear gloves to protect
your hands. Do not hold ground rod below upper stop collar.
(1) Disconnect ground clamp (4) from ground rod (1).
(2) If used, disconnect aircraft ground cable from ground rod (1).
(3) Lift slide (2) forcefully against upper stop Repeat until ground rod (1) is pulled from soil.
(4) Repeat steps (1 through 3) for ground rod at other refueling point.
Figure 2-23. Refueling Point Ground Rod Installation.
2-59
|
