|
| |
TM 10-4930-240-13
2-19. OPERATING AUXILIARY EQUIPMENT.
Refer to the applicable technical manual for operating the following equipment:
200 GPM Pump Assembly................................................................ TM 10-4320-342-10
Closed Circuit Refueling (CCR) Nozzle and Gravity Fill Adapter....... TM 10-4930-243-13&P
Single Point Refueling Nozzle(D-1 Type).......................................... TM 10-4930-242-13&P
500 Gallon Collapsible Drum ............................................................ TM 10-8110-203-12&P
200 GPM Fuel Filter Separator ......................................................... TM 10-4330-236-13
2-20. PREPARATION FOR MOVEMENT.
a. Defuel. Refer to para 2-17g.
b. 200 GPM Pump Ground Rod Removal. Refer to figure 2-22.
WARNINGS
Use care to prevent injury when removing ground rods. Wear gloves to protect
your hands Do not hold ground rod below upper stop collar.
(1) Loosen nut (9) and disconnect ground wire (7) from ground lug (10).
(2) If required, loosen screw (8) and disconnect ground wire (7) from front plate (5).
(3) Loosen two screws (4) and rotate front plate (5) from back plate (6).
(4) Lift slide (2) forcefully against upper stop. Repeat until ground rod (1) is pulled from soil.
2-57
|
