|
| |
TM 10-4930-240-13
2-15. ASSEMBLY AND PREPARATION FOR USE - cont.
g. Install 200 GPM Pump External Fuel Tank. Refer to figure 14.
(1) Remove cap (1) from fuel can (2).
(2) Lower handle (3) on adapter (4) to release position.
(3) Place adapter (4) In fuel can (2).
(4) Press adapter (4) into neck of fuel can (2) and raise handle (3) to lock position. Adapter seal will
expand and secure adapter In place.
(5) Remove cap (5) from external fuel connector (6) on 200 GPM pump (7).
(6) Connect one end of fuel hose (8) to external fuel connector (6).
(7) Connect other end of fuel hose (8) to coupling (9) on adapter (4).
Figure 14. External Fuel Tank Installation.
2-40
|
