|
| |
TM 10-4930-240-13
4-36. ELBOW ASSEMBLY REPAIR-cont.
d. Assembly. Refer to figure 4-24.
CAUTIONS
To prevent premature failure of elbow assembly, gaskets certified for arctic
service must be installed. If a new elbow or dust cap has been installed,
remove and discard black gaskets supplied with the new components and
replace them with arctic service gaskets.
Ensure gasket is fully seated in gasket seat of coupling/dust cap to prevent
leaks in assembled components.
(1) Install gasket (10) in female end of elbow (7).
(2) Install dust plug (9) in female end of elbow (7).
(3) Install gasket (8) In dust cap (6).
(4) Install dust cap (6) on male end of elbow (7).
(5) Install chains (4 and 5) and three split rings (1, 2, and 3).
4-37. FUEL HOSE (NON-COLLAPSIBLE) REPAIR
Refer to para 4-12 for repair of non-collapsible fuel hose.
4-38. FUEL HOSE (COLLAPSIBLE) REPAIR
Refer to para 4-12 for repair of collapsible fuel hose.
4-73
|
