|
| |
TM 10-4930-240-13
4-30. FUELING MANIFOLD ASSEMBLY REPAIR - cont.
b. Disassembly. Refer to figure 4-19.
NOTE
Disassemble fueling manifold assembly only to the extent required to replace
defective component.
(1) Place manifold assembly (1) in vise.
(2) Remove split rings (2 and 3) and chain (4).
(3) Remove dust cap (6) from male coupling half (13).
(4) Remove gasket (5) from dust cap (6).
(5) Remove split rings (7 and 8) and chain (9).
(6) Remove dust plug (10) from female coupling half (12).
(7) Remove gasket (11) from female coupling half (12).
(8) Remove female coupling half(12) from tee (14).
(9) Remove male coupling half (13) from tee (14).
(10) Remove tee (14) from nipple (15).
(11) Remove nipple (15) from gate valve (16).
(12) Remove gate valve (16) from nipple (17).
(13) Remove nipple (17) from tee (24).
(14) Remove split rings (18 and 19) and chain (20).
(15) Remove dust plug (21) from female coupling half (23).
(16) Remove gasket (22) from female coupling half (23).
(17) Remove female coupling half (23) from tee (24).
(18) Remove tee (24) from nipple (25).
(19) Remove split rings (26 and 27) and chain (28).
(20) Remove dust plug (29) from female coupling half (31).
(21) Remove gasket (30) from female coupling half (31).
(22) Remove female coupling half (31) from gate valve (32).
(23) Remove nipple (25) from gate valve (32).
4-55
|
