|
| |
TM 10-4930-238-12&P
2-8. OPERATING PROCEDURES - Continued.
a. Preparation for Starting - Continued
Figure 2-6. Priming Pump.
(5) Move throttle lever (1), Figure 2-7, to START position.
NOTE
Refer to TM 5-4330-217-12 prior to starting the system and open vent
valve on filter/separator. Operate engine at idle speed and fill vessel slowly
until air is expelled and fuel flows from vent valve. Close vent valve. If red
is indicated on the differential pressure gate, shutdown the equipment and
replace elements.
(6) Pull out extra fuel device button (2) until fully extended.
Figure 2-7. Engine Controls.
Change 1
2-14.1
|
