|
| |
TM 10-4930-232-12&P
4-15. Manifolds (Cont).
(3) Tee assembly (figure 4-6).
(a) Remove caps (1) from couplings (2).
(b) Remove plug (3) from female coupling (4) and replace gaskets (5).
(c) Remove nuts (6), Iockwashers (7), flatwashers (8) and cap screws (9) and remove couplings
(2 and 4).
(d) Remove cork gaskets (10) from tee body (11). Remove old sealing compound from flanges on tee
body (11) and couplings (2 and 4).
(e) Install new cork gaskets (10) using sealing compound (MIL-S-7916).
(f) Install tee body (11) and couplings (2 and 4) using cap screws (9), flat washers (8), Iockwashers (7)
and nuts (6).
4-16
|
