|
| |
TM 10-4930-232-12&P
4-15. Manifolds (Cont).
(2) Wye assembly (figure 4-5).
(a)
(b)
(c)
(d)
(e)
(f)
Remove caps (1) from coupling (2).
Remove plug (3) from female coupling (4) and replace gasket (5).
Remove nuts (6), Iockwasher (7), flatwashers (8) and cap screws (9) and remove couplings (2 and 4).
Remove cork gaskets (10) from wye body (11). Remove old sealing compound from flanges on wye
body (11) and couplings (2 and 4).
Install new cork gaskets (10) using sealing compound (MIL-S-791 6).
Install wye body (11 ) and couplings (2 and 4) using cap screws (9), flat washers (8), Iockwashers (7)
and nuts (6).
4-14
|
