|
| |
TM10-4330-235-13&P
4-13. REPLACE GROUND CLAMP
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanic Tool Kit (Appendix B, Section III, Item 4)
Equipment Conditions
System Shut Down
REMOVAL
a. Loosen screws (1) to release ground cable (2).
b. Remove nuts (3) and lockwashers (4).
c. Remove u-bolt (5) and clamp (6) from frame (7).
INSTALLATION
a. Assemble u-bolt (5) and clamp (6) to frame (7).
b. Install Iockwashers (4) and nuts (3).
c. Insert ground cable (2) in clamp (6) and tighten screws (1).
4-18
|
