|
| |
TM 10-4320-351-14
Figure 4-18. Valve Adjustment
4.14.4 Clean Fuel Injector Nozzle.
This task consists of:
a. Removal
b. Cleaning
c. Installation
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanics
Safety Wire (Appendix F, Section II, Item 17)
(Appendix B, Section III, Item 1)
Washer, Copper (Appendix I, Item 39)
Vise, Machinist's (Appendix B, Section III, Item 2)
Washer, Copper (Appendix I, Item 36)
Torque Wrench, 5-75 ft lb
Gaskets (Appendix I, Item 23)
(Appendix B, Section III, Item 2)
General Safety Requirements:
Equipment Condition:
WARNING
Pumping assembly shut down (para. 2.6)
·
Fuels are toxic and flammable. Do not get on person
or clothing. Work in well ventilated area. Do not
smoke. Ensure equipment is well grounded.
4-37
|
