|
| |
TM 10-4320-351-14
Figure 4-3. Engine Air Filter Element Replacement
b.
Installation.
(1)
Install O-ring (6) on filter body (5).
(2)
With separator fins (7) at top, slide filter element (4) over threaded rod (8).
CAUTION
Do not overtighten filter element wing nut. Too much stress on the metal disk on
the end of the element may cause the disk to fracture and be drawn into the
engine.
(3)
Install and hand tighten wing nut (3) on threaded rod (8). Ensure wing nut (3) is just tight enough to prevent
rotation of filter element (4) on threaded rod (8).
(4)
Using wing nut (1), install cover (2) on filter body (5) with dust ejector (9) pointing down.
4.9.4 Replace Engine Air Filter Hose. (Refer to figure 4-4.)
This task consists of:
a. Removal
b. Installation
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanics
None
(Appendix B, Section III, Item 1)
Equipment Condition:
Pumping assembly shut down (See para. 2.6)
a.
Removal.
(1)
Remove clamp (1) from coupler (2).
4-13
|
