|
| |
TM 10-4320-351-14
6.3.19 Remove Oil Pressure Relief Valve. (Refer to figure 6-20.)
This task consists of:
a. Disassembly
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Key, Socket Head Screw, 7 mm
None
(Appendix B, Section III, Item 3)
Pliers, Snap Ring (0.046 straight tips)
Equipment Condition:
(Appendix B, Section III, Item 3)
Oil pan removed (para. 6.3.1)
a.
Remove oil pressure relief valve plug (1) from inside lower crankcase (2) at the power take off end.
b.
Remove plug and relief valve assembly (3). Inspect valve parts. If undamaged, clean thoroughly and
reassemble. If any part if damaged, discard entire assembly.
Figure 6-20. Oil Pressure Relief Valve Removal
6-33
|
