|
| |
TM 10-4320-351-14
Figure 6-12. Piston and Rings Removal
6.3.13 Remove and Check Oil Pump. (Refer to figure 6-13.)
This task consists of:
a. Removal
INITIAL SET-UP:
General Safety Requirements:
Tools:
Combination Wrench, 7 mm
WARNING
(Appendix B, Section III, Item 3)
Key, Socket Head Screw, 4 mm
·
Fuels are toxic and flammable. Do not get on
(Appendix B, Section III, Item 3)
person or clothing. Work in well ventilated area.
Rule, Machinist's, 6 in.
Do not smoke. Ensure equipment is well grounded.
(Appendix B, Section III, Item 3)
Caliper, Vernier
Materials/Parts Required:
(Appendix B, Section III, Item 3)
None
Gauge, Thickness
(Appendix B, Section III, Item 3)
Equipment Condition:
Engine removed from engine module
(para. 6.2)
a.
Remove the two socket head cap screws (1).
b.
Remove the nut (2) from the oil pump cover (3).
6-23
|
