|
| |
TM 10-4320-351-14
Figure 6-4. Flywheel and Alternator Removal
6.3.4 Remove Fuel Flow Solenoid. (Refer to figure 6-5.)
This task consists of:
a. Removal
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Key, Socket Head Screw, 5 mm
None
(Appendix B, Section III, Item 3)
Equipment Condition:
Cylinder casing removed (para. 6.3.2)
a.
Disconnect electrical wires (1).
b.
Remove two socket head screws (2) attaching fuel flow solenoid (3) to crankcase (4). Remove and discard O-
ring (5).
6-11
|
