|
| |
TM 10-4320-351-14
1.9.1.1 Engine Module. (Refer to figure 1-3.)
The engine module (1) consists of:
a.
A 17-horsepower diesel engine (2) which serves as the prime mover for the pumping assembly.
b.
Carrying handles (3) on either side of the engine module that allow the engine module to be carried by four
persons.
c.
Alignment bolts (4) that engage slots in the pump-engine module frame to eliminate movement from engine
vibration.
d.
A detachable air filter (5) which is attached by an over-center clamp (6) to the engine intake manifold (7) during
setup. (The air filter is stowed, transported and accounted for in the accessory module.)
e.
A Power Take Off (PTO) guard (8) covers the engine output shaft and flexible coupling adapter to provide
protection from rotating parts on the rear of the engine.
f.
A pulley guard (9) encloses the engine pulley to provide protection from rotating parts on the front of the engine.
g.
A female quick disconnect fitting (10) is used to connect the fuel supply line from the pump-engine module to the
engine module.
h.
A male quick disconnect fitting (11) is used to connect the fuel return line from the engine module to the pump-
engine module.
i.
A group of electrical connectors (12) are used to connect the battery power cable, the control cable and the
pumpage overtemperature cable to the engine module.
Figure 1-3. Engine Module
1-7
|
