|
| |
TM 10-4320-351-14
4.15.6 Data Plate Replacement (Typical). (Refer to figure 4-29.)
This task consists of:
a.
Removal
b.
Installation
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Drill, Electric, 3/8 inch
Rivet (Appendix I, Item 41)
(Appendix B, Section III, Item 2)
Drill Set, Twist
(Appendix B, Section III, Item 2)
Tool Kit, Blind Rivet
(Appendix B, Section III, Item 2)
Goggles, Industrial
(Appendix B, Section III, Item 2)
General Safety Requirements:
Equipment Condition:
Accessory module removed from system
WARNING
(para. 2.9)
Wear eye protection when using power tools.
Personal injury may result from flying particles.
a.
Removal.
WARNING
Serious personal eye injury may result from flying particles when operating power
tools. Always wear eye protection.
Drill out rivets (1) attaching the data plate (2).
b.
Installation.
Attach data plate (2) with 1/8-inch pop rivets (1).
Figure 4-29. Data Plate Replacement
4-54
|
