|
| |
TM 10-4320-348-14
4.16 SUCTION/DISCHARGE HOSE ASSEMBLY REPAIR AND REPLACEMENT.
This task covers:
a) Removal
b) Repair
c) Installation
INITIAL SETUP
Equipment
Condition
Materials/Parts
Para
Gasket, MS27030-5 (Appendix I, Item 13)
2.9 Suction hose assembly removed from pump
Figure 4-4. Suction/Discharge Hose Assembly
a.
Removal. (Refer to Figure 4-4)
(1)
Remove dust cap (2) from suction hose assembly (1).
(2)
Remove dust plug (3) from suction hose assembly (1).
(3)
Remove chain (4) from dust cap (2) and dust plug (3).
(4)
Remove and discard two gaskets (5).
b.
Repair.
Replace all worn or damaged components.
c.
Installation.
(1)
Install new gaskets (5) into coupling (6) and dust cap (2).
(2)
Attach chain (4) to dust cap (2) and dust plug (3).
(3)
Secure dust plug (3) to suction hose assembly (1).
(4)
Secure dust cap (2) to suction hose assembly (1).
4-17
|
