|
| |
TM 10-4320-348-14
Table 3-1. Operator Troubleshooting - Continued
Malfunction
Test or Inspection
Corrective Action
7. LOW DISCHARGE PRESSURE
Step 1. Check for low engine speed.
Move speed control handle to START position to increase engine speed. (Refer to para. 2.7).
Step 2. Check for clogged suction hose or discharge hose.
If clogged, clean suction hose or discharge hose.
Step 3. Check for leaks in the pump suction line.
Repair leaks in pump suction port connectio ns or in suction line hoses.
8. UNEXPECTED REVERSE ROTATION
Step 1. Check for excess oil.
Drain excess oil.
Step 2. Slow recoil pull may cause reverse engine rotation.
Review starting procedures under prevailing conditions. Pull faster.
3-6
|
