|
| |
TM 10-4320-348-14
(4)
Move the fuel selector valve handle to OFF position.
(5)
Place strap (4) over top of sound enclosure cover (1), and insert loose end of strap into slot (6) of strap
ratchet (5).
(6)
Pull end of strap (4) through slot (6) until about 1 inch of strap sticks out of other side of slot (6).
(7)
While holding end of strap (4) inside slot (6) and holding ratchet assembly (5), crank strap ratchet handle (3)
upward to rotate shaft of ratchet and roll strap (4) around shaft.
CAUTION
Do not over tighten the strap assembly around the sound enclosure cover (1). Over tightening the
strap will damage the enclosure cover (1).
(8)
Continue to crank strap ratchet handle (3) up and down until strap (4) tightens around sound enclosure
cover (1) to the point where the sound enclosure cover (1) is securely held in place.
2-23
|
