|
| |
TM 10-4320-348-14
4.33 LUBE OIL STRAINER REPAIR AND REPLACEMENT.
This task covers:
a) Removal
b) Service
c) Inspection
d) Installation
INITIAL SETUP
Tools
Equipment
Tool Kit, General Mechanics
Condition
(Appendix B, Section III, Item 1)
Para
4.22 Front panel removed.
Materials/Parts
Diesel fuel (Appendix E, Section II, Item 2)
O-ring, (Appendix I, Section II, Item 18)
Figure 4-27. Lube Oil Strainer
a.
Removal. (Refer to Figure 4-27)
(1)
Remove hex head bolt (1) from crankcase.
(2)
Remove lube oil strainer (2) and O-ring (3). Discard O-ring.
b.
Service.
(1)
Thoroughly clean strainer (2) in diesel fuel.
(2)
Shake dry and rinse thoroughly again in clean diesel fuel.
(3)
Continue until all dirt has been removed from the lube oil strainer (2).
(4)
Air dry thoroughly to remove diesel fuel.
(5)
If lube oil strainer cannot be completely cleaned, then it should be replaced.
4-60
|
