| |
TM 10-4320-348-14
a.
Removal. (Refer to Figure 4-21)
(1)
Loosen clamp (1) and remove air inlet hose (2).
(2)
Remove four bolts (3) and washers (4) that attach air flow baffle (5) and cooling case cover (6) to engine.
(3)
Remove air flow baffle (5), cooling case cover (6), and cooling case cover seal (7).
b.
Inspection.
(1)
Inspect cooling case cover seal (7) for damage. Replace if damaged.
(2)
Remove debris and clean cooling case cover (6) and flywheel.
c.
Installation.
(1)
Place cooling case cover seal (7), cooling case cover (6), and air flow baffle (5), as an assembly, onto
engine.
(2)
Secure cooling case cover (6) and air flow baffle (5) onto engine with washers (4) and four bolts (3).
(3)
Install air inlet hose (2) with clamp (1).
4-51
|