|
| |
TM 10-4320-348-14
b.
Service.
(1)
Wipe outside of fuel tank with clean, dry, lint free cloth to remove any oil or grease deposits.
(2)
Wash the fuel cock (20) and filter (23) thoroughly with diesel fuel.
(3)
Check the filter (23) for cracks or damage. Replace damaged filter.
(4)
Dry fuel cock (20) thoroughly before reinstalling.
c.
Installation.
(1)
Position fuel injector pipe (26) between fuel injector nozzle (27) and injection pump (28). Tighten connectors
(25).
(2)
Insert fuel filter (23) and new gasket (24) into fuel tank (5) through fuel tank cap (1) opening and position the
fuel filter studs through the hole in the bottom of the fuel tank.
(3)
Position fuel cock (21) with a new O-ring (22) over the two studs. Be sure that the shutoff handle on the fuel
cock faces toward the engine.
(4)
Install two nuts (20) onto fuel cock (21).
(5)
Install drain plug (3) and seal (4).
(6)
Install two dampers (19), stay (18), and two bolts (17).
(7)
Install pipe fuel gauge (16) and two clamps (15).
(8)
Attach fuel tank (4) using two dampers (14), upper stay bracket (13), washer (12), lifting bolt (11), and hex
head screw (10).
(9)
Replace fuel line hose (9) and clamp (8) onto fuel cock (21).
(10)
Connect overflow hose (7) and clamp (6) to fuel tank (5).
(11)
Replace fuel cap (1) and strainer (2).
4-46
|
