|
| |
TM 10-4320-347-13&P
5.6. PUMP ASSEMBLY REPAIR AND REPLACEMENT. - Continued.
Figure 5-2. Pump Assembly Repair.
c. Clean.
(1) Remove all build up of dirt, oil, and debris from all surfaces.
CLEANING SOLVENTS
Cleaning solvents may be toxic. Use in well-ventilated areas. Avoid prolonged
inhalation of fumes or direct contact with skin. Do not use solvents near open
flames or in areas where very high temperatures prevail. Solvent flash point
must not be less than 100°F.
(2) Clean all metallic parts with a clean soft cloth or a medium bristle brush, and cleaning solvent.
(3) Allow parts to dry.
5-4
|
