|
| |
TM 10-4320-347-13&P
4.5. NOZZLE ASSEMBLY REPAIR.
This task covers:
a.
Disassembly
c.
Assembly
b.
Repair
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's (Appendix B, Item 1)
Material's Required
Tape, Anti-seize (Appendix E, Item 4)
Equipment Condition
Pump assembly shut down and cool.
WARNING
Death or serious injury could occur if fuel is not handled carefully. Use in a well-
ventilated area away from open flame, arcing equipment, ignition sources, heaters,
or excessive heat. Use proper marked containers. DO NOT SMOKE.
Fuel drained from discharge hose assembly (see para. 2.12.).
Nozzle assembly removed from discharge hose assembly (see para. 3.6.).
a.
Disassembly. (Refer to Figure 4-2).
(1) Remove quick disconnect plug (1) and gasket (2) from coupling half (3).
(2) Remove coupling half (3) from nozzle (4).
b.
Repair. Repair is limited to replacement of defective parts.
c.
Assembly.
(1) Apply tape anti-seize (Appendix E, Item 4) to all external pipe threads and install coupling half
(3) into nozzle (4).
(2) Install gasket (2) and quick disconnect plug (1) into coupling half (3).
4-4
|
