Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: Cold Start System
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

TM 10-4320-343-14 2.8.1.2  On Model 350 PAFN only perform the following procedures for cold starting. NOTE On Model 350 PAFN the cold start system is a fully-automatic engine starting fluid system  designed  to  spray  a  controlled  amount  of  starting  fluid  into  the  air  intake system of an engine during and immediately after cranking. WARNING Do not puncture or mishandle quick start kit container.  Container contains ether- based mixture that is extremely flammable and toxic.  It can be harmful or fatal if swallowed.    Avoid  contact  with  skin  or  eyes  or  breathing  fumes.    Failure  to  obey this warning may result in injury or death. a. The  engine  start  cartridge(1,  figure  2-11.1)  is  secured  with  clamp(2)  in  bracket(  3)  and  mounted  on  the  engine. To determine if the cartridge is serviceable or requires replacing refer to procedures in paragraph 4.10.4.1. WARNING Do not operate the 350 GPM Pumping Assembly without grounding. Do  not  operate  equipment  in  enclosed  area  unless  exhaust  gases  are  piped  to outside and adequate ventilation is provided.  Avoid inhalation of exhaust fumes. Failure to obey warnings may result in personnel injury or death. Do not stand within 50 feet of operating equipment without ear protection.  Failure to obey this warning may result in hearing loss. CAUTION Do  not  operate  starter  motor  for  more  than  10  seconds,  damage  to  starter  can result. b. If, the engine start cartridge(1) is determined serviceable, depress the start button(4) on control panel. c. Refer  to  operating  procedures  (paragraph  2.5),  but  allow  the  engine  to  warm  up  a  full  five  minutes  before accelerating to full speed RPM. 2-34  Change 1

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business