| |
TM 10-4320-343-14
4.14.5.1 Removal.
To prevent rolling or sliding, do not work on equipment that is not
s e c u r e l y s t a b i l i z e d.
Ensure both wheels are secure.
Failure to obey this
warning may result in serious personnel injury.
a.
Loosen socket head screw (figure 4-58, 1) in actuator lever (2).
b.
Remove two screws (3) and lockwashers (4).
c .
Remove four lock nuts (5), eight washers (6), and four screws (7).
d.
Remove actuator (8).
e .
Remove three screws (9), lockwashers (10), washers (11) and mount
bracket (12).
4.14.5.2 Installation.
a.
Position mount bracket (12) in place and install with three screws (9),
washers (11), and lockwashers (10).
b.
Place actuator (8) on mount bracket (12).
c .
Install four screws (7), eight washers (6), and four lock nuts (5).
d.
Install two screws (3) with lockwashers (4).
e.
Position actuator lever (2) on actuator (8) and tighten socket head screw (1).
4-109
|