|
| |
TM 10-4320-343-14
4.10.22.1 Cooling Coil Maintenance (Used on Model 350 PAFN only).
This task covers: 4.10.22.1 Removal
4.10.22.2
Installation
INITIAL SETUP
General Safety Instructions
Tools
To prevent rolling or sliding, do not work on equipment
General Mechanic's Tool Kit (Appendix B, Section III,
that is not securely stabilized.
Item 1)
Do not work on equipment without following standard
Equipment Conditions
shop safety precautions.
Equipment shut down, refer to paragraph 2.5.2.2
Fuel injector and return lines removed, paragraph
4.10.16.
4.10.22.1.1. Removal
a.
Remove bolts (figure 4-32.1, 1) and flat washers (2 and 3).
b.
Unscrew nuts (4).
c.
Remove duplex rings (5), oil cooler (6), and cushion (7).
4.10.22.1.2. Installation
a.
Position nuts (figure 4-32.1, 4) and duplex rings (5) on oil cooler (6).
b.
Align cushion (7) and oil cooler (6) on engine to fittings.
c.
Tighten nuts(4) to secure oil cooler(7) and cushion(6) in place.
d.
Install flat washers (2 and 3) and bolts (1).
4-60.2 Change 1
|
