|
| |
4.10.5.4 Reassemble.
a.
Install secondary filter (7) into air cleaner housing (2).
b.
Thread wing nut (6) on to shaft and tighten.
c .
Install primary filter (5) into air cleaner housing (2).
d.
Thread wing nut (4) on to shaft and tighten.
e.
Install cover (1) tighten wing nut (3).
4.10.5.5 Installation.
a.
Open clamps (figure 4-8, 5) and position air cleaner assembly (6).
b.
Position clamps (5) around air cleaner assembly (6) and install screws (4) and
nuts (3).
c.
Position hose (2) and clamp (1) on air cleaner assembly (6).
d.
Tighten clamp (1) to secure hose (2) to manifold.
e.
Tighten nuts (3) to secure air cleaner assembly (6).
4-25
TM 10-4320-343-14
|
