| |
TM 10-4320-342-24
4-4. STARTER-GENERATOR REPAIR - continued.
(23)
Install tooth lockwashers (25), coated face toward stator assembly (19) and two screws (24) 180 apart. Hand
tighten only.
(24)
Install six flat washers (26), six lockwashers (27) and six screws (24) in remaining mounting holes in stator
assembly (19). Hand tighten only.
(25)
Tighten the eight screws (24) to 18-24 in-lb.
(26)
Position screen (28) on end bell (23) and secure with four washers (29) and screws (30).
Figure 4-15. Stator, Armature and Brush Holder Installation
4-19
|