| |
TM 10-4320-342-24
3-23. ENGINE ASSEMBLY REMOVAL - continued.
b.
INSTALLATION. Refer to Figure 3-40.
(1)
Install bracket (32), flatwasher (31), lockwashers (30) and bolts (29) on engine (3).
(2)
Install elbow (7) on engine (3).
WARNING
Be careful when installing engine assembly or damage to equipment could occur.
(3)
Attach a suitable lifting device to engine lifting lug (24).
(4)
Carefully lower engine assembly (3) into unit.
(5)
Align with mounting holes and install bolt (28), flatwasher (27), lockwasher (26) and nut (25).
(6)
Install bolts (22), washers (23) and brackets (21).
(7)
Install bolts (19), washer (20) on brackets (21).
(8)
Secure bolts (19 and 22) with safety wire.
(9)
Position exhaust (18) on engine assembly (3) and install clamp (17).
(10)
Install panel (16) with screws (14) and washers (15).
(11)
Install tubes (8, 9 and 10) on adapters (11, 12 and 13).
(12)
Install tubes (4 and 5) on elbows (6 and 7).
(13)
Connect electrical connector (2) on engine (30).
(14)
Close door (1).
3-90
|