|
| |
TM 10-4320-342-24
3-22. STARTER-GENERATOR REPAIR - continued.
e.
ASSEMBLY. Refer to Figure 3-34.
(1)
Position terminal block (4) on stator assembly (12). Place wire terminal (10) on terminal block and install washers
(9), lockwashers (8) and screws.
(2)
Place leads (11) over studs B, C and E on terminal block (4).
(3)
Install a washer (6) and nut (5) on terminal block (3) studs B, C and E.
(4)
Install leads (3), washer (2) and nut (1) on terminal block (3) studs A and D.
Figure 3-34. Terminal Block Installation
3-81
|
