|
| |
TM 10-4320-342-24
Section I. LUBRICATION INSTRUCTIONS
2-1. LUBRICATION INSTRUCTIONS.
200/600 GPM Pump. Refer to LO 10-4320-342-12 for Lubrication Orders.
Section II. REPAIR PARTS, SPECIAL TOOLS,
TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE)
AND SUPPORT EQUIPMENT
2-2. COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE) CTA 50-
970 or CTA 8-100 applicable to your unit. The tool kit SC 5180-90-CL-N26, General Mechanics Tool Kit.
2-3. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
Refer to Appendix B, Maintenance Allocation Chart, for a list of special tools, TMDE, and Support Equipment and TM 10-
4320-342-24P, Repair Parts and Special Tools List.
2-4. REPAIR PARTS.
Repair parts are listed and illustrated in the Repair Parts and Special Tools List, TM 10-4320-342-24P, covering Unit,
Direct Support and General Support Maintenance of this equipment. Appendix C lists the Mandatory Replacement Parts
which need to be replaced during maintenance.
Section III. SERVICE UPON RECEIPT
2-5. SERVICE UPON RECEIPT OF MATERIEL.
a.
200/600 GPM Pump. Inspect 200/600 GPM Pump for damage incurred during shipment. If the equipment has
been damaged, report the damage on SF 364, Report of Discrepancy.
b.
Equipment. Check the equipment against the packing slip to see if the shipment is complete. Report all
discrepancies in accordance with the instructions in DA PAM 738-750.
c.
Modified Equipment. Check to see whether the equipment has been modified.
2-5
|
