|
| |
TM 10-4320-342-24
3-20. PUMP AND CLUTCH (200 GPM FUEL PUMP) REPAIR - continued.
CAUTIONS
· Support inner race of bearing as pressure is applied to shaft to prevent damage to
bearing.
· Adequately support back of shaft to prevent damage to shaft.
(18)
Press shaft (2) in bearing carrier (3).
(19)
Install split ring (8) on armature hub (9).
(20)
Install washer (10), spring washer (11) and cover (12) on flat side of armature hub (9).
(21)
Install clutch carrier (13) and clutch armature (14) on beveled side of armature hub (9) and secure with screws
(15) and nuts (16).
CAUTION
Adequately support back of shaft to prevent damage to shaft.
(22)
Press armature hub (9) and assembled components (17) on shaft (2) and install flat washer (18) and nut (19).
3-61
|
