|
| |
TM 10-4320-342-24
3-20. PUMP AND CLUTCH (200 GPM FUEL PUMP) REPAIR - continued.
(b)
If necessary, peel appropriate number of laminated layers (6) from shim to achieve dimension F above.
(4)
Install shim stock number one (5), spring washer (7), shim (5) and bearing (2) in clutch housing (1).
(5)
Position spacer (3) on bearing (2) and install bearing (8) in clutch housing (1).
(6)
Install bearing retainer plate (9) with screws (10).
Figure 3-23. Selecting Shim Stack Number One (200 GPM Fuel Pump)
3-57
|
