|
| |
TM 10-4320-342-24
3-20. PUMP AND CLUTCH (200 GPM FUEL PUMP) REPAIR - continued.
Refer to Figure 3-22.
(10)
Remove elbow (1) and bushing (2) from bearing carrier (3).
(11)
Remove bolts (4) and flat washers (5) from bearing carrier (3).
(12)
Separate bearing carrier (3) (with attached clutch components) from clutch housing (6).
(13)
Remove bearing (7) from pump shaft (8).
(14)
Remove nut (9) and flat washer (10) from pump shaft (8).
(15)
Remove armature hub (11), key (12) and shim stack (13) from pump shaft (8).
(16)
Remove nuts (14), screws (15) and separate clutch armature (16), clutch carrier (17), flat washer (18), spring
tension washer (19) and retainer plate (20).
(17)
Remove retaining ring (21) from armature hub (11).
(18)
Press out pump shaft (8) from bearing carrier (3).
(19)
Remove screws (22) and bearing retainer plate (23) from bearing carrier (3).
(20)
Remove bearing (24), shim stack (25) and spring tension washer (26) from bearing carrier (3).
(21)
Remove threaded inserts (27) from bearing carrier (3).
(22)
Remove spring tension washer (28) and shim stacks (29) from clutch rotor (30).
(23)
Disengage nut key (31) and remove bearing nut (32) and key nut.
(24)
Press out clutch rotor (30) from clutch housing (6).
(25)
Remove screws (33), flat washers (34), clutch field (35) and shim stack (36) from clutch housing (6).
(26)
Remove screws (37) and flat washers (38) from clutch field (35).
(27)
Remove screws (39), retainer plate (40), bearing (41), spacer (42), bearing (43), shim stack (44) and spring
tension washer (45) from clutch housing (6).
(28)
Remove threaded inserts (46 and 47) from clutch housing (6).
3-53
|
