|
| |
TM 10-4320-342-24
3-19. PUMP AND CLUTCH (600 GPM FUEL PUMP) REPAIR - continued.
CAUTION
To prevent damage to bearing, support inner race on bearing when pressing shaft
through bearing.
(6)
Install bearing spacer (2), shim stack number one (1) and stack and spring (wavy) washer (10) in clutch housing
(4).
(7)
Press inner bearing (11) onto shaft (9) and on inner lip (3) in clutch housing (4) until fully seated.
Figure 3-15. Selecting Shim Stack Number One (600 GPM Fuel Pump)
3-40
|
