|
| |
TM 10-4320-342-24
3-10.
WINCH REPAIR -continued.
NOTE
Only three rods are required for installation. Make sure rods are installed in the
positions recorded during disassembly.
(29)
Install three rods (3) and six screws (1 and 2) between gearbox (4) and motor (5).
3-11.
WINCH BRAKE ASSEMBLY REPAIR.
This task covers:
Repair
INITIAL SETUP
Equipment Condition
Brake Assembly removed (Para 3-10)
NOTE
Brake assembly is removed and installed in the drum assembly during winch
repair.
REPAIR. Refer to Figure 3-4.
Repair consists of replacing damaged or defective snap ring (1), tube spacer (2) and brake (3).
Figure 3-4. Winch Brake Assembly Repair
3-14
|
