| |
TM 10-4320-342-24
2-81. WINCH CONTROL BOX ASSEMBLY REPAIR.
This task covers:
a. Removal
b. Disassemble
c. Repair
d. Assemble
e. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
Battery Electrical Connector removed
Item 1)
(Para 2-62)
Material/Parts
Lockwashers (App F, Item 27)
Tag (App E, Item 16)
a.
REMOVAL. Refer to Figure 2-109.
(1) Open door panel (1).
(2) Disconnect connectors (2 and 3) from receptacles (4 and 5)
(3) Remove nuts (6), lockwashers (7), flatwashers (8), bolts (9) and box assembly (10) including attached cables (11
and 12) and control station (13).
Figure 2-109. Winch Box Assembly Removal
2-251
|