|
| |
TM 10-4320-342-24
2-70. PANEL LIGHTS REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
Battery disconnected (Para 2-61)
Item 1)
Material/Parts
Tags (App E, Item 16)
NOTE
This procedure covers one of the panel lights. Replacement of the other panel
lights are identical.
a. REMOVAL. Refer to Figure 2-97.
(1)
Open cover (1) and lock in place.
(2)
Open control panel (2).
(3)
Tag electrical wires (3).
(4)
Remove screw (4) and electrical wires (3) from panel light socket (8).
(5)
Unscrew and remove shade socket (5), light bulb (6) and ring (7).
(6)
Remove light socket (8), lockwasher (9) and nut (10) from control panel (2).
b. INSTALLATION.
(1)
Install light socket (8), lockwasher (9) and nut (10) on control panel (2).
(2)
Install ring (7), light bulb (6) and shade (5) on light socket (8) so opening in shade is in the down position when
the control panel (2) is raised. Tighten ring (7) against shade (5).
NOTE
Wire numbers are stamped on each electrical wire. This information, in
conjunction with data on FO-1 and FO-2, 200/600 GPM Pump Wiring Diagram, may
be used to connect wires if tags are lost or illegible.
(3)
Tighten nut (10) against control panel (2).
2-228
|
