|
| |
TM 10-4320-342-24
2-63. BATTERY HEATER ASSEMBLY REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
Battery removed (Para 2-62)
Item 1)
Material/Parts
Adhesive (App E, Item 3)
Locknuts (App F, Item 59 and 63)
Lockwashers (App F, Item 60)
a. REMOVAL. Refer to Figure 2-90.
(1)
Remove locknuts (1), washers (2), bolts (3) and connector (4) from bracket (5).
(2)
Remove bolts (6), lockwashers (7), flatwashers (8) and plate (9) from battery box (10).
(3)
Remove adhesive and thermostat (11) from bottom of plate (12).
(4)
Remove locknuts (13), flatwashers (14) and screws (15) from plate (12) and remove plate (12).
(5)
Remove battery heater assembly (16) from battery box (10).
b. INSTALLATION.
(1)
Position battery heater assembly (16) on battery box (10).
(2)
Position battery heater assembly (16) on bottom of battery box (10) and with plate (12) install screws (15),
flatwashers (14) and locknuts (13).
(3)
Apply a coat of adhesive to flat surface of thermostat (11) and attach to bottom of plate (12) close to center as
possible. Hold in place until adhesive is dry.
(4)
Install plate (9), lockwashers (7), flatwashers (8) and bolts (6) on battery box (10).
(5)
Install connector (4) on bracket (5) with bolts (3), washers (2) and locknuts (1).
2-212
|
