|
| |
TM 10-4320-342-24
2-60. ENGINE OIL TEMPERATURE TRANSMITTER REPLACEMENT.
This Task Covers
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
Oil drained from engine (LO 10-4320-342-12)
Item 1)
200/600 GPM Pump shut down (Para 2-7c,
Torque Wrench: 0-200 inch-pounds (App B,
TM 10-4320-342-10)
Sect III, Item 2)
Material/Parts
Preformed Packing (App F, Item 6)
Safety Wire (App E, Item 15)
Lubricating Oil (App E, Item 20)
a. REMOVAL. Refer to Figure 2-87.
(1)
Remove safety wire from connector (1) and engine oil temperature transmitter (2).
(2)
Disconnect connector (1) from engine oil temperature transmitter (2).
(3)
Remove engine oil temperature transmitter (2) and preformed packing (3) from engine (4). Discard preformed
packing.
b. INSTALLATION.
(1)
Lubricate and install preformed packing (3) on engine oil temperature transmitter (2).
(2)
Install engine oil temperature transmitter (2) in engine (4). Torque 60 inch-pounds.
(3)
Connect connector (1) to engine oil temperature transmitter (2).
(4)
Secure connector (1) and engine oil temperature transmitter (2) with safety wire.
2-205
|
