|
| |
TM 10-4320-342-24
2-58. TOTAL TIME METER REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
200/600 GPM pump assembly shut down
Item 1)
(Para 2-7c, TM 10-4320-342-10)
Torque Wrench: 0-300 inch-pounds (App B,
Sect III, Item 2)
Material/Parts
Textile Braid (App E, Item 19)
Tag (App E, Item 16)
Insulation Sleeving (App E, Item 31)
a. REMOVAL. Refer to Figure 2-85.
(1)
Open door (1).
(2)
Remove textile braids (2) and slide sleeving (3) off connectors (4 and 5).
(3)
Tag and disconnect connectors (4 and 5).
(4)
Remove bolts (6), washers (7) and total time meter (8).
b. INSTALLATION.
(1)
Position total time meter (8) on engine and install washers (7) and bolts (6). Torque 40 inch-pounds.
NOTE
Wire numbers are stamped on each electrical wire. This information, in
conjunction with data on FO- 1 and FO-2, 200/600 GPM Pump Wiring Diagram, may
be used to connect wires if tags are lost or illegible.
(2)
Connect connectors (4 and 5).
(3)
Slide sleeving (3) over connectors (4 and 5) and tie textile braids (2) on sleeving.
(4)
Close door (1).
2-201
|
