|
| |
TM 10-4320-342-24
2-54. ENGINE FUEL INJECTION NOZZLE REPLACEMENT - continued.
b. INSTALLATION. Refer to Figure 2-81.
CAUTION
Make sure that primary and secondary engine fuel injection nozzles are installed in
their correct location or engine will not work properly.
(1)
Install atomizer shroud (11) in combustor case (12).
(2)
Install seal plate (10) on nozzle (3).
(3)
Press fuel nozzle (3) into atomizer (11).
(4)
Apply antiseize compound on bolt (4) and stud (8).
(5)
Secure fuel nozzle (3) with bolt (4), washers (5 and 9) and stud (8) on combustor case (12).
(6)
Install bracket (7) on stud (8) and secure with nut (6).
(7)
Connect tube (2) to fuel nozzle (3). Torque to 35 inch-pounds.
(8)
Safety wire bolt (4).
(9)
Close door (1).
2-194
|
