|
| |
TM 10-4320-342-24
2-49. ENGINE WIRING HARNESS W2 REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
Engine Fuel Upper Cover removed (Para 2-47)
Item 1)
Material/Parts
Preformed Packing (App F, Items 18)
Safety Wire (App E, Item 15)
a. REMOVAL. Refer to Figure 2-76.
(1)
Remove safety wire from connectors (1, 2 and 6).
(2)
Disconnect connector (1) from fuel solenoid valve (4).
(3)
Disconnect connector (2) from fuel control valve (5).
(4)
Disconnect electrical connector (6) from connector (3).
(5)
Remove nut (7) from connector (3).
(6)
Remove engine wiring harness W2 (8) from fuel control lower cover (9).
(7)
Remove preformed packing (10) from engine wiring harness W2 (8). Discard preformed packing.
b. INSTALLATION.
(1)
Install preformed packing (10) on engine wiring harness W2 (8).
(2)
Position engine wiring harness W2 (8) on fuel control lower cover (9).
(3)
Install nut (7) on connector (3).
(4)
Connect connector (6) to connector (3).
(5)
Connect connector (1) to fuel solenoid valve (4).
(6)
Install connector (2) on fuel control (5).
(7)
Install safety wire on connectors (1, 2 and 6).
2-181
|
