| |
TM 10-4320-342-24
2-48. ENGINE OIL FILTER REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
Engine Fuel Upper Cover removed (Para 2-47)
Item 1)
Starter-generator removed (Para 2-45)
Material/Parts
General Safety Instructions
Filter Element (App F, Item 17)
WARNING
Preformed Packing (App F, Items 18)
For disposal of contaminated lubricants, refer to
Rags (App E, Item 2)
FM10-20.
a. REMOVAL. Refer to Figure 2-75.
(1)
Open door (1).
(2)
Loosen but do not remove bolts (2) from oil filter cover (3).
WARNING
The oil filter cover will contain engine oil. To prevent personnel injury, avoid
contact with eyes and repeated or prolonged contact with skin.
(3)
Rotate oil filter cover (3) approximately one-eighth turn and remove from engine (4).
(4)
Remove preformed packing (5) from oil filter cover (3). Discard preformed packing.
(5)
Remove oil filter (6) from engine (4).
(6)
Clean oil filter cover (3) with lint-free rags.
b. INSTALLATION.
(1)
Lubricate preformed packing (5) and install an oil filter cover (3).
(2)
Install oil filter (6) on engine (4).
(3)
Install oil filter cover (3) on engine (4) and rotate approximately one-eighth turn onto bolts (2).
2-179
|