|
| |
TM 10-4320-342-24
2-42. OIL FILTER SERVICING AND REPAIR - continued.
c. DISASSEMBLY. Refer to Figure 2-67.
NOTE
Note position of elbows prior to removal.
(1)
Remove elbows (10 and 11) from adapter (17) and bushing (18).
(2)
Remove bushing (18) from adapter (19).
(3)
Remove adapters (17 and 19) from housing (7).
(4)
Remove preformed packings (20 and 21) from housing (7). Discard preformed packing.
d. ASSEMBLY.
(1)
Install preformed packings (20 and 21) on adapters (17 and 19).
(2)
Install adapters (17 and 19) on housing (7).
(3)
Install bushing (18) on adapter (19).
(4)
Install elbows (10 and 11) on adapter (17) and bushing (18) as noted during removal.
e. INSTALLATION.
(1)
Position filter assembly (12) on bracket (16) and install bolts (15), washers (14) and nuts (13).
(2)
Connect tubes (8 and 9) to elbows (10 and 11) as noted during removal.
(3)
Close doors (1 and 2).
2-162
|
